A complete characterization of disjunctive conic cuts for mixed integer second order cone optimization

We study the convex hull of the intersection of a disjunctive set defined by parallel hyperplanes and the feasible set of a mixed integer second order cone optimization (MISOCO) problem. We extend our prior work on disjunctive conic cuts (DCCs), which has thus far been restricted to the case in which the intersection of the hyperplanes and the feasible set is bounded. Using a similar technique, we show that one can extend our previous results to the case in which that intersection is unbounded. We provide a complete characterization in closed form of the conic inequalities required to describe the convex hull when the hyperplanes defining the disjunction are parallel.     

基于个体仿真的机场安检系统优化研究

建立了安检流程的网络流模型,模型中包含了不稳定的乘客到达情形、嫌疑乘客以及反馈机制。分析了安检过程中的瓶颈所在,并给出了相应的优化方案,包括整个安检过程的通行规则,A区和B区内部预检节点与普通节点的适当比例等。仿真结果显示,为了充分利用安检资源并兼顾预检乘客的利益,通行规则应采用连通方案。依照统计数据中计算出的各种参数,在A区预检节点和普通节点比例设置为2∶2,B区预检节点和普通节点比例设置为3∶5的情况下,旅客平均等待时间最短,等待时间的标准差也最小,同时高峰期的通行量也相对较优。进一步分析了不同的文化背景及机场情况。对于美国人和瑞士人,通过改变预检乘客的选择概率来满足他们不同的行为偏好。仿真结果说明,预检乘客选择哪类节点进行安检对平均等待时间、等待时间的标准差和高峰期通行量的影响不大。分析了插队情形,插队对平均等待时间和高峰期通行量几乎没有影响,但当插队比例非常大时,旅客等待时间标准差会增加,影响乘客到达的准确性。最后,针对具体情况提出了一些合理的建议,并给出了进一步的研究计划。     

涡旋提取-改进BCR法测定土壤中重金属的化学形态

土壤中重金属的化学形态更能表明其迁移性和生物毒性。传统的重金属化学形态检测方法BCR法由于其提取时间长,影响检测效率。采用涡旋提取对传统BCR法进行方法优化,对土壤中Cu、Zn、Pb、Cd、Ni、Cr等6种重金属元素化学形态进行了实验分析。研究了涡旋转速、涡旋时间以及涡旋提取的方法精密度与准确度。结果表明,当涡旋转速为2500rpm,酸可交换态涡旋10min,可还原态涡旋10min,可氧化态涡旋5min时,涡旋提取效果良好。采用土壤标准物质对方法的适用性进行了验证,6种元素的检出限在0.4?32μg/kg,测定值均在标准值范围内,相对标准偏差在0.3%?5.5%之间。涡旋提取-改进BCR法分析速度快,灵敏度高,能满足同时测定土壤中多种金属元素化学形态的检测要求。     

Improving the Accuracy of Small-Molecule Crystal Structures Solved from Powder X-Ray Diffraction Data by Using External Sources

Structural analysis using powder X-ray diffraction data has overcome many obstacles and nowadays is readily applicable for structural analysis of all types of compounds and materials. Being less straightforward than single crystal diffraction, it requires significant users’ input and consequently, implementation of standardized tools to assess the accuracy of crystal structures. This article discusses potential errors in crystal structure solution and refinement of small-molecule structures obtained from PXRD data. Moreover, it proposes how accuracy of these structures can be improved by using high-quality PXRD data, complementary external analytical techniques, knowledge stored in crystal structure databases, as well as an approach to search the parameter space to avoid local minima in testing different sets of geometry restraints.     

Grey relational analysis for optimization of wear parameters and surface roughness on nano composite coating

The higher wear resistance of Ni based nano composite coatings makes them potential replacement in protecting the substrate materials. The role of surface roughness of the coating along with wear parameters on the specific wear rate, pin temperature, and COF are addressed in the present study. The use of hard nano Al₂O₃ particles found significant role in increasing the resistance to wear for Ni matrix coatings on Al6061 material. The resistance to dislocation offered by these nano Al₂O₃ particles and smear out of debris with plastic deformation indicated abrasive and adhesive nature of wear mechanism in combination. The optimization of wear parameters are carried out by surface response method based grey relation analysis. The normal load applied onto the pin has significant influence on the specific wear rate and temperature rise in the pin. The surface roughness of the coating has also found instrumental in the higher pin temperature and friction coefficient.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.     

Impact of Collection Volume and DNA Extraction Method on the Detection of Biomarkers and HPV DNA in First-Void Urine

The potential of first-void (FV) urine as a non-invasive liquid biopsy for detection of human papillomavirus (HPV) DNA and other biomarkers has been increasingly recognized over the past decade. In this study, we investigated whether the volume of this initial urine stream has an impact on the analytical performance of biomarkers. In parallel, we evaluated different DNA extraction protocols and introduced an internal control in the urine preservative. Twenty-five women, diagnosed with high-risk HPV, provided three home-collected FV urine samples using three FV urine collection devices (Colli-Pee) with collector tubes that differ in volume (4, 10, 20 mL). Each collector tube was prefilled with Urine Conservation Medium spiked with phocine herpesvirus 1 (PhHV-1) DNA as internal control. Five different DNA extraction protocols were compared, followed by PCR for GAPDH and PhHV-1 (qPCR), HPV DNA, and HBB (HPV-Risk Assay), and ACTB (methylation-specific qPCR). Results showed limited effects of collection volume on human and HPV DNA endpoints. In contrast, significant variations in yield for human endpoints were observed for different DNA extraction methods (p < 0.05). Additionally, the potential of PhHV-1 as internal control to monitor FV urine collection, storage, and processing was demonstrated.     

Comparative Studies of Selected Criteria Enabling Optimization of the Extraction of Polar Biologically Active Compounds from Alfalfa with Supercritical Carbon Dioxide

The aim of this research was to provide crucial and useful data about the selection of the optimization criteria of supercritical carbon dioxide extraction of alfalfa at a quarter-technical plant. The correlation between more general output, including total phenolics and flavonoids content, and a more specified composition of polar constituents was extensively studied. In all alfalfa extracts, polar bioactive constituents were analyzed by both spectrometric (general output) and chromatographic (detailed output) analyses. Eight specific phenolic acids and nine flavonoids were determined. The most dominant were salicylic acid (221.41 µg g⁻¹), ferulic acid (119.73 µg g⁻¹), quercetin (2.23 µg g⁻¹), and apigenin (2.60 µg g⁻¹). For all seventeen analyzed compounds, response surface methodology and analysis of variance were used to provide the optimal conditions of supercritical fluid extraction for each individual constituent. The obtained data have shown that eight of those compounds have a similar range of optimal process parameters, being significantly analogous for optimization based on total flavonoid content.     

Evaluation of Multi-Objective Optimization Algorithms for NMR Chemical Shift Assignment

An automated NMR chemical shift assignment algorithm was developed using multi-objective optimization techniques. The problem is modeled as a combinatorial optimization problem and its objective parameters are defined separately in different score functions. Some of the heuristic approaches of evolutionary optimization are employed in this problem model. Both, a conventional genetic algorithm and multi-objective methods, i.e., the non-dominated sorting genetic algorithms II and III (NSGA2 and NSGA3), are applied to the problem. The multi-objective approaches consider each objective parameter separately, whereas the genetic algorithm followed a conventional way, where all objectives are combined in one score function. Several improvement steps and repetitions on these algorithms are performed and their combinations are also created as a hyper-heuristic approach to the problem. Additionally, a hill-climbing algorithm is also applied after the evolutionary algorithm steps. The algorithms are tested on several different datasets with a set of 11 commonly used spectra. The test results showed that our algorithm could assign both sidechain and backbone atoms fully automatically without any manual interactions. Our approaches could provide around a 65% success rate and could assign some of the atoms that could not be assigned by other methods.